Blunt Force: The Underreported Threat Of Security Professionals
What is ‘blunt force trauma’, and what type of injuries result from blunt force impact?
Please let me answer this question in the shortest possible way, without throwing some hyper intellectual medical terminologies at you, I don’t understand myself. Let me do it in reasonable simple and understandable terms, and more importantly, within context of this article.
Severe injuries and deaths resulting from blunt force trauma
are some of the most common cases encountered by forensic pathologists. For
instance, almost all transportation fatalities, including those involving road
traffic collisions and pedestrians being hit by vehicles result from blunt
force trauma.
Blunt force trauma is also the consequence faced by homeland
and private security professionals after being hit by a solid object, such as a
fist, foot, knee, elbow, iron bar, extendable baton, baseball bat, crowbar,
brick, bottle, can, chair, fire extinguisher, to name but a few, or indeed after
being pushed hard against another solid object e.g. door, wall, floor or car or
down a flight of stairs etc.
Something that remains widely underreported since shootings
and stabbings seem to make more dramatic headlines in the mainstream media.
When asking a couple of law firms how they would define
‘blunt force trauma injuries’ they responded with the following answers:
“A severe traumatic episode caused to the body (or head) with the sudden introduction of a blunt instrument used with great force.”
“Blunt force trauma is when the body is hit with an object that is blunt, or not sharp, with enough force to cause significant damage”.
According to Wikipedia, blunt abdominal trauma (BAT)
comprises 75% of all blunt trauma and is the most common example of this injury.
The severity of such injury is mostly determined by the
speed, velocity, size and weight of the object, and can range in severity from
a tiny bruise to internal haemorrhages, bone fractures, cardiac tamponade,
airway obstructions/rupture, and in the worst-case scenario result in ruptured
organs, rapid internal bleeding and ultimately your death.
I do believe most security professionals will be aware of the potential severity of injuries resulting from blunt force. But I don’t believe many will chose to document and report every incident of this nature. “Too much admin”, some may say, and “it’s part of the job”, others will state.
Many security professionals have a reasonable understanding
of the most realistic risks and threats they face, and subsequently are either being
issued, or they themselves invest in body armour.
However, it is worth noting that any type of flexible body
armour made from either an aramid fibre (i.e. Kevlar®) or a polyethylene (i.e.
Dyneema®) including the latest high performance body armour produced by top
secret manufacturers at top secret locations for top secret agencies, do not
offer anywhere near enough protection from this specific operational
risk.
On a domestic level (meaning homeland or private security,
rather than military) the risk of being punched, beaten, kicked, or faced by
someone throwing stuff at you is hundred times higher than being stabbed or
shot. Therefore, it is rather saddening
to see that more than 99% of body armour issued to domestic homeland security
professionals offer insufficient protection from this specific risk.
Again, in the context of a good body armour, the key
objective must be to offer sufficient levels of protection from the most
realistic threats and risks you faces whilst on duty.
I urge you to make a conscious decision when investing in
such type of PPE. Simply ask yourself
the question, what is the most important criteria for YOU? The
concealability, the weight, the thickness, or the level of protection from the
risks and threats you have identified?
If the concealability of a body armour is key for you (i.e.
covert operations and surveillance) then you may well need to look for the
thinnest body armour, and the ‘blunt force trauma’ protection may have to
become of secondary importance.
However, please understand that in general the most likely
risk you face on a daily basis, is also the one you should seek protection
from, and as I have stated earlier on in this article, the probability of you
getting punched, hit, kicked or pushed around or have someone throwing stuff at
you is far greater than the risk of being stabbed or shot.
To achieve the maximum level of protection from blunt force
trauma injuries a body armour would have to be of a rigid structure, rather
than a soft/flexible structure. Two diverse protective devices which highlight
in a brilliantly understandable way the importance and the effectiveness of
such protection are:
- Motorbike Helmets: Never mind the fact that wearing a helmet is law when riding a motorbike. Wearing a helmet during a motorcycle crash significantly reduces the risk of damage to one’s skull, traumatic brain injury, and even death, countless studies have shown. We all know motorbike helmets are of a rigid/solid structure. They would not offer the blunt force protection and perform to the level it is required if the structure would be soft or flexible.
- Riot Shields: A riot shield is a lightweight protection device, typically deployed and used by police in almost every country during riots, protests and mass disturbances. They are typically constructed from a rigid material to offer maximum levels of protection from attacks with blunt weapons and thrown projectiles. The officers’ lives depend on the performance of this piece of equipment. Again, to offer this high level of blunt force protection, it is required for its structure to be rigid, not soft or flexible.
The most in-depth research study on ‘blunt force trauma
injuries’ or in more tactical terms ‘backface signature injuries’ sustained
while wearing such body armour was produced by Marianne Wilhelm back in 2008, and
is titled “Injuries
to law enforcement officers: The backface signature injury”. It really is
worth a read.
This great piece has raised important questions regarding
the protection afforded to officers wearing personal body armour, along with the
current test methods used to assess the true performance of the equipment. Some
test results showed that some revealed deformations exceeding the NIJ Standard’s
backface signature limit. Such increased deformation can lead to serious
injuries, including blunt force trauma or backface signature injuries, which
have occurred in the field over and over again.
PPSS Group Demo Video : Blunt Force
Although your body armour might be successful in containing the round fired by a weapon or the knife thrusted at you by a hostile individual, it might not protect you from the impacting energy during other types of assaults, unless it is offering you officially certified protection from this precise risk. The most respected standard for body armour in relation to blunt force trauma protection is Germany’s VPAM (Vereinigung der Prüfstellen für Angriffshemmende Materialien und Konstruktionen) Standard, titled: “Testing of Impact Resistance against Throwing and/or Striking Objects” and its rating will be W1 (lowest) – W9 (highest).
It is also worth pointing out that our Technical Director
Colin Mackinnon, a man who served 26+ years with the UK’s Police Forces,
delivered an online presentation to a large audience of security professionals
recently. Following his presentation, he
asked a question: “Does your armour protect against knife, spike, needle, and
blunt force trauma?”
Out of those questioned 55% of people did not know what protection their vests provided.
PPSS Group's highly acclaimed stab proof vests offer W5 (highest level) of blunt force protection. Please contact us for further information.
Comments
Post a Comment